[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] (unknown)

I am trying to running batch file schedules in the HVACtemplateIdealLoadsAirSystem.  I get one severe error below and I am not sure how to correct for this error.  Can someone assist?

   ** Severe  ** DualSetPointWithDeadBand: Effective heating set-point higher than effective cooling set-point - increase deadband if using unmixed air model
   **   ~~~   ** occurs in Zone=G SW APARTMENT During Warmup & Sizing, Environment=CHICAGO_IL_USA HEATING 99.6% CONDITIONS, at Simulation time=01/21 00:00 - 00:15
   **   ~~~   ** LoadToHeatingSetPoint=-2116.867, LoadToCoolingSetPoint=-15751.306
   **   ~~~   ** Zone TempDepZnLd=712.53
   **   ~~~   ** Zone TempIndZnLd=15751.31
   **   ~~~   ** Zone Heating ThermostatSetPoint=19.14
   **   ~~~   ** Zone Cooling ThermostatSetPoint=0.00
   **   ~~~   ** Zone HeatingSetPointOffset=0.00
   **   ~~~   ** Zone CoolingSetPointOffset=0.00
   **  Fatal  ** Program terminates due to above conditions.


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe