Re: [EnergyPlus_Support] ZoneAirHeatBalanceAlgorithm

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

As noted in the IDD, the thirdorderbackwarddifference is
used if you leave a blank in that field.

That is also the default if you have no ZoneAirHeatBalanceAlgorithm
object in your file.

Confirmation of which is used is shown in the .eio file whether an object
is included or not.  See Output Details document for
explanation.

At 05:49 AM 11/14/2012, George wrote:



> Hi there,
>
> I was wondering what sort of algorithm is used
> for calculating the zone heat balance. I¢ve noticed that it¢s an optional
> input but I am not sure what solution is been used in the solution
> manager when the field it is basically blank. In the input-output
> reference I found that ¡¢if the default algorithm is used the object is
> not required¢¢. I¢m not currently using any input in that particular
> field but I wanted to know which one is the default algorithm. Is the
> thirdOrderBackwardDifference used as default when the field is
> blank or a completely different algorithm?<?xml:namespace prefix = o
> ns = "urn:schemas-microsoft-com:office:office" />
>
>  
>
> Many thanks,
>
> George

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___