Re: [EnergyPlus_Support] Re: How to obtain an HTML Results Page?

Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions

120 E. Pritchard St. | Asheboro, NC 27203 | Mobile 503-688-8951

www.phasechange.com

On Tue, Dec 4, 2012 at 7:33 AM, phidalgosandoval <phidalgosandoval@xxxxxxxxx> wrote:

Hi all,

Thanks Jeremiah for the information already provided, it works very well on E+ Version 7.0, because on V7.2 a crash ocurred, but "strangly" on V7.0 it works fine.

Can anyone please send me the APP-G-LEED-ROTATION file on version 7?

Thanks in advance.

Pablo

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jeremiah Crossett <jcrossett@...> wrote:
>
> Pablo,
> To get HTML reports you need to specify the object for
>
> Output: TableSummeryReports
> Report 1 Name AllSummary
> and
>
> "output control table style"
> Column Separator HTML
> Unit Conversion InchPound
>
> But for LEED you also need to use the objects I have attached in the
> document titled LEED rotation objects. I have also attached an example file
> that has the parametric objects to create all four of the required
> rotations that you can run to see the automatic rotations and baseline
> creation works.
> You should read
> http://apps1.eere.energy.gov/buildings/energyplus/pdfs/using_energyplus_for_compliance.pdf
> But the summery is that you paste all of the items from the
> APP-G-LEED-ROTATION file attached into your file. Then after the run is
> complete use the appG post process utility from EP launch. The result will
> be a HTML file that is the average of the four rotations. You can also use
> the utility cost and tariff objects to place a monetary value to energy,
> then use them in your baseline and proposed building. Lastly you compare
> the value of energy in proposed vs rotated average baseline as a percentage
> of cost relationship for LEED submittal.
>
> Best of luck!
>
>
>
>
> *
> *
> *
> *
> *Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions*

> *
> 120 E. Pritchard St. | Asheboro, NC 27203 | Mobile 503-688-8951
> www.phasechange.com
> *
>
> *
> *
> *
> *
>
>
>
>
> On Thu, Nov 29, 2012 at 9:10 AM, phidalgosandoval <
> phidalgosandoval@...> wrote:
>
> > **

> >
> >
> > Yes, it´s an annual simulation.
> >
> >
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> > >
> > > Are you running an annual simulation?
> > >
> > > If you truly can't figure it out -- send your
> > > input file to the helpdesk. (http://energyplus.helpserve.com)
> >
> > >
> > > At 10:00 AM 11/29/2012, phidalgosandoval wrote:
> > > >Hi Linda,
> > > >
> > > >thanks for the reply, I am trying to obtain an
> > > >HTML output in the tabular reports, because I am
> > > >trying to fill the EAp2 for LEED and I obtain
> > > >the rest of the spreadsheets but not the HTML page.
> > > >
> > > >Any suggestions?
> > > >
> > > >Pablo.
> > > >
> > > >
> > > >
> > > >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> > > > >
> > > > > Are you confusing "normal" running with running
> > > > > the Example File Generator (which has a
> > > > slightly different results summary)?
> > > > >
> > > > > Or are you not asking for HTML output in the tabular reports?
> > > > >
> > > > > At 09:50 AM 11/29/2012, phidalgosandoval wrote:
> > > > > >Hi,
> > > > > >
> > > > > >I am obtaining results of a simulation in the
> > > > > >Version 7.0, but I can´t obtain an HTML page result.
> > > > > >
> > > > > >What can be the reason?
> > > > > >
> > > > > >Thanks in advance.
> > > > > >
> > > > > >
> > > > > >
> > > > > >------------------------------------
> > > > > >
> > > > > >Primary EnergyPlus support is found at:
> > > > > >http://energyplus.helpserve.com or send a
> > > > > >message to energyplus-support@
> > > > > >
> > > > > >The primary EnergyPlus web site is found at:
> > > > > >http://www.energyplus.gov
> > > > > >
> > > > > >The group web site is:
> > > > > >http://groups.yahoo.com/group/EnergyPlus_Support/
> > > > > >
> > > > > >Attachments are currently allowed but be mindful
> > > > > >that not everyone has a high speed
> > > > > >connection. Limit attachments to small files.
> > > > > >
> > > > > >EnergyPlus Documentation is searchable. Open
> > > > > >EPlusMainMenu.pdf under the Documentation
> > > > link and press the "search" button.
> > > > > >Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >Primary EnergyPlus support is found at:
> > > >http://energyplus.helpserve.com or send a
> > > >message to energyplus-support@
> > > >
> > > >The primary EnergyPlus web site is found at:
> > > >http://www.energyplus.gov
> > > >
> > > >The group web site is:
> > > >http://groups.yahoo.com/group/EnergyPlus_Support/
> > > >
> > > >Attachments are currently allowed but be mindful
> > > >that not everyone has a high speed
> > > >connection. Limit attachments to small files.
> > > >
> > > >EnergyPlus Documentation is searchable. Open
> > > >EPlusMainMenu.pdf under the Documentation link and press the "search"
> > button.
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>