[EnergyPlus_Support] AirLoopHVAC has no air flow workaround?

[Miroslav Bratanov <miroslav_bratanov@xxxxxxxxx>]

Hello all,

I have a building with some indirectly conditioned spaces and I am 
modeling a system (PVAV with reheat) just to satisfy the requirement of 
Appendix G that all conditioned spaces should be simulated as both 
heated and cooled. I set higher and lower setpoint temperatures for the 
heating and cooling respectfully, so the system would never turn on. But 
during the simulation I get a severe error which says that AirLoopHVAC 
has no air flow. Of course this is absolutely correct since there are no 
any loads.
I wonder if anyone has had such case and what's the way to deal with 
this problem?

Any help is highly appreciated!

Thank you!
Miroslav


------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/