[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] Re: Technical Question about Simulation Report - Energy Plus
Look at the ZONE Objects which you still have left.
And you can use or create new Thermostat Control objects.
At 11:24 AM 1/11/2013, Ivan Mezzacapa wrote:
I have one question.Téc. Ivan Mezzacapa
How can in associate the zones of design builder with the zones of energy
I have created my IDF of design builder model, and deleting all HVAC
systems because i wanna use the HVAC templates.
In IDF editor i have created the systems but i don't know how associate
the same with the zones of design builder model.
Desenhista Projetista de Ar
Condicionado / Consultor de Eficiência Energética em Ar Condicionado
Date: Fri, 11 Jan 2013 08:50:38 -0800
Subject: Re: [EnergyPlus_Support] Re: Technical Question about Simulation
Report - Energy Plus
Most of the time I end
up deleting the design builder HVAC systems entirely and then adding HVAC
systems using the HVAC templates option in Energy Plus.
Here is a video that
shows how you could do the same:
Jeremiah D. Crossett
| Senior Analyst
| Phase Change Energy Solutions
120 E. Pritchard St. | Asheboro, NC 27203 | Mobile
On Fri, Jan 11, 2013 at 5:50 AM,
- I believe I already answered this on the helpdesk and this still
isn't the DesignBuilder support forum:
- "I believe you need to address your questions to the
DesignBuilder support, not EnergyPlus support." However, DB folk do
have access to this forum.
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.