[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Re: SQL file not generated





German,  I tried this also. I have a really simple filename and path, so this can't be the error.

Best regards

 

Geert

 

 

 

Van: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Namens ecoeficientees
Verzonden: 07 February 2013 09:43
Aan: EnergyPlus_Support@xxxxxxxxxxxxxxx
Onderwerp: [EnergyPlus_Support] Re: SQL file not generated

 

 

Be careful with the path of your idf file. If it has special characters (like accents) SQL file is not generated. Move the idf to a simpler path if this is your case.

Germán Campos

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Geert Bellens" wrote:
>
> I use a NTFS on Windows 7. So It should be able to generate a 16 Gb file
> according to the table...
>
> For safety I've cut the monthly and daily reporting. Hope it will do the
> trick. (result in 4 hour...)
>
>
>
>
>
> Geert
>
>
>
>
>
> Van: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Namens Edwin Lee
> Verzonden: 06 February 2013 22:47
> Aan: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Onderwerp: Re: [EnergyPlus_Support] SQL file not generated
>
>
>
>
>
> I concur with Brent, but it certainly depends on the Windows version you are
> running on (more importantly the format of the underlying file system:
> http://en.wikipedia.org/wiki/Comparison_of_file_systems#Limits).
>
> On Wed, Feb 6, 2013 at 3:30 PM, Griffith, Brent
> wrote:
>
>
>
> If you are on Windows, I think it is important to keep file sizes below
> 2Gigs or the operating system will have problems. For full annual runs, it
> is usual to need/want to reduce the output variable requests.
>
>
>
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Geert Bellens
> Sent: Wednesday, February 06, 2013 1:29 PM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] SQL file not generated
>
>
>
>
>
> Anyone experiance with an energyplus simulation which didn't generated an
> SQL file ?
> It was generated during a half year simulation (+- 1 Gbyte), but when
> simulating a full year, the SQL is simply not generated.
>
> Geert
>
>
>
>
>
>
>
> --
>
> Edwin Lee
>
> Doctoral Candidate, Oklahoma State University
>
> ASHRAE Student Member, Former ASHRAE OSU Student Branch President
>
> Office: ATRC 303: 405-744-3727
>



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___