[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] temperature distribution report





You could try throwing in your occupancy schedule to the schedule field.  That looks like it should work:

   A3, \field Schedule Name
       \type object-list
       \object-list ScheduleNames
       \note Optional schedule name. Binning is performed for non-zero hours.
       \note Binning always performed if left blank.

(this is in the object Output:Table:TimeBins)


At 06:27 AM 2/7/2013, Geert Bellens wrote:


Yes but then I can't get this only for the occupied hours, am I right ?
 
 
Best Regards,
 
 
Geert Bellens
 
 
Van: EnergyPlus_Support@xxxxxxxxxxxxxxx [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Namens Linda Lawrie
Verzonden: 07 February 2013 14:01
Aan: EnergyPlus_Support@xxxxxxxxxxxxxxx
Onderwerp: RE: [EnergyPlus_Support] temperature distribution report
 
 

Did you look at the TimeBins option of tabular reports?

On 2013-02-07 05:56, Geert Bellens wrote:
> In designbuilder you can get a distribution of the temperatures (to
> choose between total hours or just during occupation)
>
> Very east to get a quick total view of the amount of temperatures
> above a certain value ( eg in summer 25 °C)
>
> I was looking for a report output in energyplus which would give me
> the same result. (using Xesoview, openstudio, doesn't matter..)
>
> Best regards
>
> Geert
>
> VAN: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] NAMENS Jim Dirkes
> VERZONDEN: 07 February 2013 12:42
> AAN: EnergyPlus_Support@xxxxxxxxxxxxxxx
> ONDERWERP: RE: [EnergyPlus_Support] temperature distribution report
>
> What is "a report of the temperature distribution as in
> DesignBuilder"?
>
> Have you used Dview? DesignBuilder's Results Viewer?
>
> JAMES V DIRKES II, PE, BEMP, LEED AP
> WWW.BUILDINGPERFORMANCETEAM.COM [1]
> ENERGY ANALYSIS, COMMISSIONING & TRAINING SERVICES
> 1631 Acacia Drive, Grand Rapids, MI 49504 USA
> 616 450 8653
>
> FROM: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] ON BEHALF OF Geert
> Bellens
> SENT: Thursday, February 07, 2013 6:25 AM
> TO: EnergyPlus_Support@xxxxxxxxxxxxxxx
> SUBJECT: [EnergyPlus_Support] temperature distribution report
>
> Is there any way in E+ to get a report of the temperature
> distribution as in Desingbuilder?
>
> Geert Bellens
>
>
>
> Links:
> ------
> [1] http://www.buildingperformanceteam.com/
> [2] http://energyplus.helpserve.com
> [3] http://www.energyplus.gov
> [4] http://groups.yahoo.com/group/EnergyPlus_Support/
> [5]
>
> http://groups.yahoo.com/group/EnergyPlus_Support/join;_ylc=X3oDMTJmZjA3ZHY4BF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEzNjAyNDE3MjQ-
> [6]
>
> http://groups.yahoo.com/group/EnergyPlus_Support;_ylc=X3oDMTJka21vbzVkBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMzYwMjQxNzI0
> [7] http://docs.yahoo.com/info/terms/




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___