I'll try it, thanks.
Best Regards,
Geert Bellens
BESTBUILDINGCONCEPT BVBA
Building simulations - comfort measurements
Moederhoefstraat 198
B 2547 Lint
GSM: ++32 (0) 499/71.98.29
Van: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Namens Linda Lawrie
Verzonden: 07 February 2013 14:34
Aan: EnergyPlus_Support@xxxxxxxxxxxxxxx
Onderwerp: RE: [EnergyPlus_Support] temperature distribution report
You could try throwing in your occupancy schedule to the schedule field. That looks like it should work:
A3, \field Schedule Name
\type object-list
\object-list ScheduleNames
\note Optional schedule name. Binning is performed for non-zero hours.
\note Binning always performed if left blank.
(this is in the object Output:Table:TimeBins)
At 06:27 AM 2/7/2013, Geert Bellens wrote:
Yes but then I can't get this only for the occupied hours, am I right ?
Best Regards,
Geert Bellens
Van: EnergyPlus_Support@xxxxxxxxxxxxxxx [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Namens Linda Lawrie
Verzonden: 07 February 2013 14:01
Aan: EnergyPlus_Support@xxxxxxxxxxxxxxx
Onderwerp: RE: [EnergyPlus_Support] temperature distribution report
Did you look at the TimeBins option of tabular reports?
On 2013-02-07 05:56, Geert Bellens wrote:
> In designbuilder you can get a distribution of the temperatures (to
> choose between total hours or just during occupation)
>
> Very east to get a quick total view of the amount of temperatures
> above a certain value ( eg in summer 25 °C)
>
> I was looking for a report output in energyplus which would give me
> the same result. (using Xesoview, openstudio, doesn't matter..)
>
> Best regards
>
> Geert
>
> VAN: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] NAMENS Jim Dirkes
> VERZONDEN: 07 February 2013 12:42
> AAN: EnergyPlus_Support@xxxxxxxxxxxxxxx
> ONDERWERP: RE: [EnergyPlus_Support] temperature distribution report
>
> What is "a report of the temperature distribution as in
> DesignBuilder"?
>
> Have you used Dview? DesignBuilder's Results Viewer?
>
> JAMES V DIRKES II, PE, BEMP, LEED AP
> WWW.BUILDINGPERFORMANCETEAM.COM [1]
> ENERGY ANALYSIS, COMMISSIONING & TRAINING SERVICES
> 1631 Acacia Drive, Grand Rapids, MI 49504 USA
> 616 450 8653
>
> FROM: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] ON BEHALF OF Geert
> Bellens
> SENT: Thursday, February 07, 2013 6:25 AM
> TO: EnergyPlus_Support@xxxxxxxxxxxxxxx
> SUBJECT: [EnergyPlus_Support] temperature distribution report
>
> Is there any way in E+ to get a report of the temperature
> distribution as in Desingbuilder?
>
> Geert Bellens
>
>
>
> Links:
> ------
> [1] http://www.buildingperformanceteam.com/
> [2] http://energyplus.helpserve.com
> [3] http://www.energyplus.gov
> [4] http://groups.yahoo.com/group/EnergyPlus_Support/
> [5]
>
> http://groups.yahoo.com/group/EnergyPlus_Support/join;_ylc=X3oDMTJmZjA3ZHY4BF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEzNjAyNDE3MjQ-
> [6]
>
> http://groups.yahoo.com/group/EnergyPlus_Support;_ylc=X3oDMTJka21vbzVkBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMzYwMjQxNzI0
> [7] http://docs.yahoo.com/info/terms/
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___