* Severe ** FindRootSimpleController: Controller error for controller = "S-23 AHU COOLING COIL CONTROLLER"
** ~~~ ** Environment=COMMUNITYCENTER_CKS122812, at Simulation time=01/03 14:00 - 14:30
** ~~~ ** Controller function is inconsistent with user specified controller action = "" action
** ~~~ ** Actuator will be set to maximum action
** ~~~ ** Controller control type=Temperature
** ~~~ ** Controller temperature setpoint = 14.00 [C]
** ~~~ ** Controller sensed temperature = 14.23 [C]
** ~~~ ** Controller actuator mass flow rate set to 2.36
[kg/s]
** ~~~ ** Controller actuator temperature = 10.00 [C]
** ~~~ ** Note: Chilled water coils should be reverse action and the entering chilled
** ~~~ ** water temperature (controller actuator temperature) should be below the setpoint temperature
** ~~~ **
Note: Hot water coils should be normal action and the entering hot
** ~~~ ** water temperature (controller actuator temperature) should be above the setpoint temperature
I have set the 'Action' variable to as specified and actuated flow is 'autosize'.
Any suggestions on what else I should be looking at in troubleshooting this error?