[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] v7 to v8 conversion with EPMacro formulas
I'm struggling to get my models to convert from version 7 to version 8. Using the version updater tool some of the simple formulas get through the conversion process, but the more complicated ones don't. For example the one below doesn't appear in the v8 version at all, and then when I try and run it it complains that it can't find the objects that are defined by this formula...
##set1 a_1st_N_OP #eval[ 43.449 / 3.5 ]
##set1 a_1st_N_OP_sqrd #eval[ a_1st_N_OP ** 2 ]
##set1 f_a_1st_N_OP_sqrd #eval[ GlazingRatioN * a_1st_N_OP_sqrd]
##set1 Tot_Win_W_1st_N_OP #eval[ SQRT OF f_a_1st_N_OP_sqrd ]
##set1 Glz_A_1st_N_OP #eval[ GlazingRatioN * 43.449 ]
##set1 Win_H_1st_N_OP #eval[ Glz_A_1st_N_OP / Tot_Win_W_1st_N_OP ]
##set1 Win_W_1st_N_OP #eval[ Tot_Win_W_1st_N_OP / 2 ]
##set1 Half_Win_H_1st_N_OP #eval[ Win_H_1st_N_OP / 2 ]
##set1 Half_Win_W_1st_N_OP #eval[ Win_W_1st_N_OP / 2 ]
##set1 Win_Area_N_1st_a #eval[ Win_H_1st_N_OP * Tot_Win_W_1st_N_OP]
I'm pretty confident it isn't a problem of too many characters - I've tried replacing the object names with single letters and it still doesn't get through.
Thanks for the help.
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: