Have you checked if your hard drive is filling up after ~500 simulations? If you are using a FAT32 partition, there is a limit on max number of files you can
save in a folder, too. Change to NTFS if this is the cause.
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
On Behalf Of Linda Lawrie
Sent: 16 July 2013 12:36
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] EnergyPlus crashed when running simulations from parametrics
You will probably need to send this to the helpdesk -- cannot help you from your brief description.
Linda
At 01:27 AM 7/16/2013, marko.ignjatovic1980 wrote:
I created parametric study for my model with 1000 runs. I modified energy+.idd to obtain 1000 values and to perform 1000 runs. I see that parametric preprocessor created 1000 idfs and started simulation. It worked fine for app 500 simulations, but then crashed. It could not read input file. Is there some PC limit or should I divide model in lets say 3 portions (app 300 simulations each)?
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___