[EnergyPlus_Support] Low Temperature Variable Flow

[<saraperna123@xxxxxxxx>]

Hi everyone. My building is climatized by Low Temperature Variable Flow. I have several problems with the Zone Mean Air Temperature in the zones: in the first floor of the building the temperature are so high ( in winter time) that the Radiant Panel doesn't work at all, instead in the second floor the temperatures are terrible low and seems that the Panel cannot rise it enough.

I supposed that the most important heat losses are dued to Ventilation, Infiltrations and exchange with the outside through walls. Do I have to consider some other important exchanges?

Why if I increase non-conducting thickness the situation doesn't change at all?

Thanks 

Sara

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___