[EnergyPlus_Support] hollow core slabs [1 Attachment]

[Athinodoros Tzoulis <a_tzoulis@xxxxxxxxx>]

Hi all, 

I have 2 questions. 

1) I would like to model a hollow core slab in a room and above it a concrete layer with embedded water pipes for concrete core activation. 

Is there a possibility to do it in EnergyPlus? 

I have seen a possibility to do it in but as a ventilated slab. However I don't want ventilation in the room. 

2) I have modelled a room with a heated floor inside a solid concrete slab. 

Is it possible to separate the system in 2 or more loops within the slab. So, having embedded tubes in the slab in the whole slab but having more than 2 water inlet and outlet nodes (as it is in reality)? (see pic) 

Is there a possibility to model this system with virtual partitions? 

Best regards, 

Athinodoros Tzoulis 

__._,_.___

  	View attachments on the web
  







Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\3hollowcore.png