Re: [EnergyPlus_Support] humidity ratio = -999

[<fpasserini.tn@xxxxxxxxx>]

I'm already using TemperatureAndHumidityRatio



Controller:WaterCoil,

    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Controller,  !- Name

    TemperatureAndHumidityRatio,  !- Control Variable

    Reverse,                 !- Action

    Flow,                    !- Actuator Variable

    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Air Outlet Node,  !- Sensor Node Name

    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Water Inlet Node,  !- Actuator Node Name

    autosize,                !- Controller Convergence Tolerance {deltaC}

    autosize,                !- Maximum Actuated Flow {m3/s}

    0.000;                   !- Minimum Actuated Flow {m3/s}



SetpointManager:MultiZone:Humidity:Maximum,

    SM 0terra mag_uff_sud2,  !- Name

    Air Loop 0terra mag_uff_sud2,  !- HVAC Air Loop Name

    0.005,                   !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir}

    0.012,                   !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir}

    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Air Outlet Node;  !- Setpoint Node or NodeList Name


Regards

---In energyplus_support@xxxxxxxxxxxxxxx, <linda@...> wrote: