Re: [EnergyPlus_Support] humidity ratio = -999

[Bereket Nigusse <nigusse_ba@xxxxxxxxx>]

Send the defect IDF file to the helpdesk and we will look into it.

 Bereket


On Monday, December 9, 2013 3:30 AM, "fpasserini.tn@xxxxxxxxx" <fpasserini.tn@xxxxxxxxx> wrote:

I'm already using TemperatureAndHumidityRatio
Controller:WaterCoil,
    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Controller,  !- Name
    TemperatureAndHumidityRatio,  !- Control Variable
    Reverse,                 !- Action
    Flow,                    !- Actuator Variable
    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Air Outlet Node,  !- Sensor Node Name
    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Water Inlet Node,  !- Actuator Node Name
    autosize,                !- Controller Convergence Tolerance {deltaC}
    autosize,                !- Maximum Actuated Flow {m3/s}
    0.000;                   !- Minimum Actuated Flow {m3/s}
SetpointManager:MultiZone:Humidity:Maximum,
    SM 0terra mag_uff_sud2,  !- Name
    Air Loop 0terra mag_uff_sud2,  !- HVAC Air Loop Name
    0.005,                   !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir}
    0.012,                   !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir}
    Air Loop 0terra mag_uff_sud2 AHU/1 Cooling Coil Air Outlet Node;  !- Setpoint Node or NodeList Name
Regards

---In energyplus_support@xxxxxxxxxxxxxxx, <linda@...> wrote: