Hello everybody,
i tried to connect my low temperature radiant panels with a water to water heat pump. But it's giving me the following error which i can't resolve, it seems that the system is getting too cold:
** ~~~ ** Environment=ANNO, at Simulation time=05/01 10:20 - 10:25
** ~~~ ** PlantLoop Name (SupplySide)= CHILLED WATER LOOP
** ~~~ ** PlantLoop Setpoint Temperature=17.0 {C}
** ~~~ ** PlantLoop Inlet Node (SupplySide) has a Setpoint.
** ~~~ ** PlantLoop Inlet Node (DemandSide) has a Setpoint.
** ~~~ ** PlantLoop Outlet Node (SupplySide) has a Setpoint.
** ~~~ ** PlantLoop Outlet Node (DemandSide) has a Setpoint.
** ~~~ ** PlantLoop Outlet Node (SupplySide) "CW SUPPLY OUTLET NODE" has temperature=-100.8 {C}
** ~~~ ** PlantLoop Inlet Node (SupplySide) "CW SUPPLY INLET NODE" has temperature=18.6 {C}
** ~~~ ** PlantLoop Minimum Temperature=1.0 {C}
** ~~~ ** PlantLoop Maximum Temperature=98.0 {C}
** ~~~ ** PlantLoop Flow Request (SupplySide)=0.0 {kg/s}
** ~~~ ** PlantLoop Flow Request (DemandSide)=5.4E-002 {kg/s}
** ~~~ ** PlantLoop Node (SupplySide) "CW SUPPLY OUTLET NODE" has mass flow rate =5.4E-002 {kg/s}
** ~~~ ** PlantLoop PumpHeat (SupplySide)=12.5 {W}
** ~~~ ** PlantLoop PumpHeat (DemandSide)=0.0 {W}
** ~~~ ** PlantLoop Cooling Demand=363.2 {W}
** ~~~ ** PlantLoop Heating Demand=0.0 {W}
** ~~~ ** PlantLoop Demand not Dispatched=0.0 {W}
** ~~~ ** PlantLoop Unmet Demand=27036.5 {W}
** ~~~ ** PlantLoop Capacity=719890.0 {W}
** ~~~ ** PlantLoop Capacity (SupplySide)=719890.0 {W}
** ~~~ ** PlantLoop Capacity (DemandSide)=0.0 {W}
** ~~~ ** PlantLoop Operation Scheme=CW LOOP OPERATION
** ~~~ ** PlantLoop Operation Dispatched Load = 363.2 {W}
** ~~~ ** PlantLoop Operation Dispatched Load (SupplySide)= 363.2 {W}
** ~~~ ** PlantLoop Operation Dispatched Load (DemandSide)= 0.0 {W}
** ~~~ ** Branches on the Loop.
** ~~~ ** Demand Branches:
** ~~~ ** COOLING DEMAND INLET
** ~~~ ** Components on Branch:
** ~~~ ** PIPE:ADIABATIC:DEMAND SIDE INLET PIPE
** ~~~ ** ZT 2 PAN RAD CH
** ~~~ ** Components on Branch:
** ~~~ ** ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW:PR ZT2
** ~~~ ** ZT 3 PAN RAD CH
** ~~~ ** Components on Branch:
** ~~~ ** ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW:PR ZT3
** ~~~ ** ZT 4 PAN RAD CH
** ~~~ ** Components on Branch:
** ~~~ ** ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW:PR ZT4
** ~~~ ** ZT 5 PAN RAD CH
** ~~~ ** Components on Branch:
** ~~~ ** ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW:PR ZT5
** ~~~ ** ZT 6 PAN RAD CH
** ~~~ ** Components on Branch:
** ~~~ ** ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW:PR ZT6
** ~~~ ** ZT 7 PAN RAD CH
** ~~~ ** Components on Branch:
** ~~~ ** ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW:PR ZT7
** ~~~ ** DEMAND BYPASS BRANCH
** ~~~ ** Components on Branch:
** ~~~ ** PIPE:ADIABATIC:DEMAND SIDE BYPASS
** ~~~ ** COOLING DEMAND OUTLET
** ~~~ ** Components on Branch:
** ~~~ ** PIPE:ADIABATIC:CW DEMAND SIDE OUTLET PIPE
** ~~~ ** Supply Branches:
** ~~~ ** CW PUMP BRANCH
** ~~~ ** Components on Branch:
** ~~~ ** PUMP:VARIABLESPEED:CIRC PUMP
** ~~~ ** GSHPCLG CHILLER BRANCH
** ~~~ ** Components on Branch:
** ~~~ ** HEATPUMP:WATERTOWATER:EQUATIONFIT:COOLING:GSHPCLG
** ~~~ ** PURCHASED COOLING BRANCH
** ~~~ ** Components on Branch:
** ~~~ ** DISTRICTCOOLING:PURCHASED COOLING
** ~~~ ** SUPPLY BYPASS BRANCH
** ~~~ ** Components on Branch:
** ~~~ ** PIPE:ADIABATIC:SUPPLY SIDE BYPASS
** ~~~ ** COOLING SUPPLY OUTLET
** ~~~ ** Components on Branch:
** ~~~ ** PIPE:ADIABATIC:SUPPLY SIDE OUTLET PIPE
somebody can help me?
Thank you very much, ena