I even tried the example file: RadLoHeatCool, and the room air temeprature is still way out of its control range. Is this the EnergyPlus's problem?
HJ
Hi all,
I have some projects that has radiant system with DOAS. I find
EnergyPlus could not size this type of system properly it never try to
meet the thermostat temeprature. When I look at the summer or winter
design condition, the temperature could go as high as 30 or as low as 7.
I used openstudio to export to EnergyPlus. For radiant system, it does
not use thermostat but use its only temperature control, I wonder if
that could be the problem for sizing? Does anyone have any successful
experience with this type of system sizing and could share your idf file?
Many thanks,
HJ
__._,_.___
Posted by: HJ <wanghaojie630@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___