Dear Srinarayana,
The way I learnt this was to take a simple example in the examples folder and hand draw the schematics for the node connections.
I must disswade you from building a model from scratch. I've never done it, well almost never. Take an existing working model and adapt it.
I would also recommend using tools which simplify the process, such as OpenStudio, or a commercial software.
Your statement is confusing as you said that you had both a splitter and a mixer on the return path. This doesn't make sense. The mixer is on the return and the splitter is on the supply side right?
Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 12.07.2014, at 15:37, "Nari nsrinarayana@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Srinarayana
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___