[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] UFAD+Radiant Ceiling System Modeling Guidence



Dear All,

I am trying to model a complex HVAC system to evaluate annual performance in climatic zone 1A. Here are some details on system arrangements and operational priority:

  1. The central plant has two chillers generating chilled water at 15/19 degC and 6/12 degC. 
  2. Each floor will be served by UFAD and Ceiling supply Radiant system. The UFAD supplied with AHU supply chilled water temperature of 6/12 degC whereas Ceiling Radiant system with chilled water supply of 15/19 degC  to cater Sensible and Latent Heat inside thermal zone.
  3. There is DOAS installed to cater OA load. The DOAS AHU coil will be supplied with two chilled water supply, one at 15/19degC and second at 6/12degC. 
Has anyone successfully modeled such mechanical configuration in Eplus. I would appreciate to get expert advice on following points:
  1. Is it possible to model above plant configuration in EPlus?
  2. Is it possible to create two loop supply at different temperature for a Air Handling Unit?
  3. Is it possible to create two systems operating simultaneously for a zone in EPlus?
Any technical advice or references would be highly appreciated.

Thanks in advance,

--


Javed Iqbal, LEED AP, CEA
Sr. Energy Analyst 



__._,_.___
Posted by: Javed Iqbal <eee.javed@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Visit Your Group
Yahoo! Groups
• Privacy • Unsubscribe • Terms of Use

__,_._,___