Dear Forum,
I was made aware of the FaultModel objects within E+ last week at the ASHRAE / IBPSA conference and took a look at them today. An example is: FaultModel:TemperatureSensorOffset:OutdoorAir.
I’m not sure what their intended use is! It seems that for an outdoor air sensor fault’s impact on economizer operation, I could just change the economizer changeover setpoint �.
Have any of you investigated or used these objects? Have a insight into their purpose?
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653._,___
__._,_.___
Posted by: Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___