Re: [EnergyPlus_Support] Chilled Ceilings - Many ways to skin a cat

["Jean Marais jeannieboef@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

correct. lower water temperatures are required to get the desired surface temperature.

2014-09-30 9:55 GMT+02:00 Geert Bellens geert.bellens@xxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:

 

Jean,

Thank you for this answer.
Still one question:
"d) absolutely critical is to control the surface temperature of the active area. Most likely, you may need to artificially drop the supply water temperature to achieve this, but the dT will be the same, so you will still be using the correct energy"

You mean:  lower water temperatures are needed in the simulation, to get a decent cooling load, than one would normally have in reality?

--

 

Met vriendelijke groeten,

 
Geert Bellens

 

 

'jeannieboef@xxxxxxxxx' jeannieboef@xxxxxxxxx [EnergyPlus_Support] schreef op 19/09/2014 6:23:

d) absolutely critical is to control the surface temperature of the active area. Most likely, you may need to artificially drop the supply water temperature to achieve this, but the dT will be the same, so you will still be using the correct energy

__._,_.___

---

Posted by: Jean Marais <jeannieboef@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 8

• Privacy • Unsubscribe • Terms of Use

__,_._,___