Hello everyone!
I am having a problem simulating a VRF system. I created the entire system and the simulation shows me an error that makes no sense for me.
Is reporting that i was inserted data that do not conform to the model input. It's the first time I see this error.
** Warning ** SizeDXCoil: Coil:Cooling:DX:VariableRefrigerantFlow 06SUBSOLO:NOBREAK VRF COOLING COIL
** ~~~ ** ...Rated Total Cooling Capacity will be limited by the maximum rated volume flow per rated total capacity ratio.
** ~~~ ** ...DX coil volume flow rate (m3/s) = 3.000000
** ~~~ ** ...Requested capacity (W) = 36641.887
** ~~~ ** ...Requested flow/capacity ratio (m3/s/W) = 8.187E-005
** ~~~ ** ...Maximum flow/capacity ratio (m3/s/W) = 6.041E-005
** ~~~ ** ...Adjusted capacity (W) = 49660.652
************* SizeDxCoil: Potential issue with equipment sizing for Coil:Cooling:DX:VariableRefrigerantFlow 06SUBSOLO:NOBREAK VRF COOLING COIL
** ~~~ ** User-Specified Total Cooling Capacity of 55950.76 [W]
** ~~~ ** differs from Design Size Total Cooling Capacity of 49660.65 [W]
** ~~~ ** This may, or may not, indicate mismatched component sizes.
** ~~~ ** Verify that the value entered is intended and is consistent with other components.
************* SizeVRF: Potential issue with equipment sizing for AirConditioner:VariableRefrigerantFlow 03SUBSOLO:SUPERVISAOPREDIAL VRF TERMINAL UNIT
** ~~~ ** User-Specified Rated Total Heating Capacity of 63000.00 [W]
** ~~~ ** differs from Design Size Rated Total Heating Capacity of 55950.76 [W]
** ~~~ ** This may, or may not, indicate mismatched component sizes.
** ~~~ ** Verify that the value entered is intended and is consistent with other components.
** Warning ** SizeDXCoil: Coil:Cooling:DX:VariableRefrigerantFlow 06SUBSOLO:DADOSEVOZ VRF COOLING COIL
** ~~~ ** ...Rated Total Cooling Capacity will be limited by the minimum rated volume flow per rated total capacity ratio.
** ~~~ ** ...DX coil volume flow rate (m3/s) = 0.000000
** ~~~ ** ...Requested capacity (W) = 0.000
** ~~~ ** ...Requested flow/capacity ratio (m3/s/W) = 0.000
** ~~~ ** ...Minimum flow/capacity ratio (m3/s/W) = 4.027E-005
** ~~~ ** ...Adjusted capacity (W) = 0.000
** Severe ** Sizing: Coil:Cooling:DX:VariableRefrigerantFlow 06SUBSOLO:DADOSEVOZ VRF COOLING COIL has zero rated air flow rate
If anyone can help, I'd be grateful. Follow the idf.
Best regards,
Técg. Ivan Mezzacapa
Projetista de Ar Condicionado / Consultor em Eficiência Energética
LinkedIN: http://www.linkedin.com/in/ivanmezzacapa
Celular: (11)9963-9326__._,_.___ View attachments on the web
Posted by: Ivan Mezzacapa <ivan_slip@xxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___