[EnergyPlus_Support] Severe ** Temperature (low) out of bounds [-192.18]

["lmblanes@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Dear Modellers

I have a repeating problem in my model. It is the typical "temperature out of bounds". 
I dont use "finite differences".
I use Full Exterior
The zones are not conditioned and the loads are not very high
The "surface temperature upper limit" is set to 2000

Any idea about what can be wrong? It strikes me that the the temperature is negative

Thanks
Luis
------------------------------------------------------------------------------------------------
Severe  ** Temperature (low) out of bounds [-192.18] for 
zone="LEVEL6.50CONCOURSE:IDEALLOADS3", for 
surface="LEVEL6.50CONCOURSE:IDEALLOADS3_PARTITION_10_0_10104"
   **   ~~~   **  During Warmup & Sizing, Environment=SUMMER DESIGN 
DAY IN FIUMICINO TERMINAL 1 JUL, at Simulation time=07/15 00:00 - 00:00
   **   ~~~   ** Zone="LEVEL6.50CONCOURSE:IDEALLOADS3", Diagnostic Details:
   **   ~~~   ** ...Internal Heat Gain [15.000] W/m2
   **   ~~~   ** ...Infiltration/Ventilation [0.000] m3/s
   **   ~~~   ** ...Mixing/Cross Mixing [0.000] m3/s
   **   ~~~   ** ...Zone is not part of HVAC controlled system.

__._,_.___

---

Posted by: lmblanes@xxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 6

• Privacy • Unsubscribe • Terms of Use

__,_._,___