On Tue, Nov 11, 2014 at 4:25 PM, 'jeannieboef@xxxxxxxxx' jeannieboef@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
ÂThere was a user that had a similar issue. From memory, the message from Linda then was to make sure that there is a load requiring power from the battery, else you won't see it working.Mit freundlichen GrüÃ?en- Sent from my iPhone (excuse the brevity)i. A.Jean Maraisb.i.g. bechtoldTel.  +49 30 6706662-23
On 11.11.2014, at 17:20, "Shaun Duerr sduerr85@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:ÂI have set up a Battery (at the moment the generic battery from the
inputoutputreference). I have tried using a Schedule to control the
battery, it is set for always on at the moment, however it would seem that
the battery is not available for consideration in the simulation. I am
tracking via external interface (and what to control that way as well), and
it seems that I am unable to get the battery available for use in my
simulations. Does anyone have any suggestions as to why this would be?
Shaun
__._,_.___
Posted by: Shaun Duerr <sduerr85@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.