Re: [EnergyPlus_Support] Trim and respond pumping logic per Ashrae section 6.5.4.2

["Jean Marais jeannieboef@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

have you checked if there are existing Modelica Modules which you could tie into e+ over FMU interface?

2014-12-10 23:36 GMT+01:00 pkennedy178@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:

 

Does anyone have a straight forward method to model the pumping savings attributed to applying a trim and respond algorithm where the pumping differential set point is manipulated until at least one valve in the system is 90% open of greater?

 

Our current method involves a lengthy process and three pieces of software plus some custom VBA code.

 

Is this even possible inside energyPlus?

 

Regards Philip

__._,_.___

---

Posted by: Jean Marais <jeannieboef@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 11

• Privacy • Unsubscribe • Terms of Use

__,_._,___