[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Trim and respond pumping logic per Ashrae section 6.5.4.2
Does anyone have a straight forward method to model the
pumping savings attributed to applying a trim and respond algorithm where the
pumping differential set point is manipulated until at least one valve in the
system is 90% open of greater?
Our current method involves a lengthy process and three
pieces of software plus some custom VBA code.
Is this even possible inside energyPlus?
Regards Philip
__._,_.___
Posted by: pkennedy178@xxxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___