Dear all, Please help to resolve next issue (what last unsolved within this task): How to make that relief air in air mixer at 100% goes to fresh air inlet? In this case the mixer damper is still could operate, directing return air either through PHEX or right into supply air stream bypassing the PHEX ARTEM ZHUKOV | HVAC/Mechanical Engineer | HVAC TPM | Energy Engineer | Building Physics Specialist | Sustainability Engineer | M: +420 774 081 898 | View LinkedIn profile | Web Cal From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Hello, Jean, This heat pump in “Occupied” mode works exactly based on condenser setpoint (SetpointManager:SingleZone:Reheat should be ok), and in “Unoccupied” mode HP works always at 100%, so I could use scheduled setpoint manager… ARTEM ZHUKOV | HVAC/Mechanical Engineer | HVAC TPM | Energy Engineer | Building Physics Specialist | Sustainability Engineer | M: +420 774 081 898 | View LinkedIn profile | Web Cal From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Thinking about it, that's prettymuch what you want. I would test it. Just mind the controls of this object are known to be tricky and from memory are assosiated to a thermostat setpoint, so you may find it impossible to implement. Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity) i. A. Jean Marais b.i.g. bechtold Tel. +49 30 6706662-23
__._,_.___ Posted by: "Artem Zhukov" <az141208@xxxxxxxxx> Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button. __,_._,___ |