--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13
LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13
LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
2015-02-19 18:57 GMT+01:00 robertogrilloait@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:
ÂDear all,
Despite a lot of searching in the documentation, I have not been able to find an answer to my question:
I would like to model a combined system for water-based space heating (with baseboards) and DHW.
I thought I could treat space heating and DHW with two different loops and one common WaterHeater:Mixed object.
By doing this I get the following error:
-Â Â Â Â Â Â Â Â Â Same component name and type has differing Node Names.
  **  ~~~  **   Component:   WATERHEATER:MIXED, name=WATER HEATER
The message is pretty clear. However, I do not see any other possibility to model my system, since loops can only have one splitter and one mixer.Â
How could I do this?
I would be grateful for any advice on how to procede.
__._,_.___
Posted by: Julien Marrec <julien.marrec@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.