[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Minimum ventilation ACH in summary report tables
Dear all,
Looking for a post regarding the outdoor flow rates between baseline and proposed design cases I found this one and I would like to ask you if for reporting the outdoor airflow rates in the section 1.4 tables for LEED EAp2 documentation you use the Mechanical Ventilation table from the Outdoor Air Summary Report. Since this table uses the Average Outdoor Air During Occupied Hours I am not sure if this the appropiate values I should insert in section 1.4 tables. The only other option I see is to use the Output Variable: Zone Mechanical Ventilation Air Changes per Hour and do the sum for each area.
Any suggestions or comments would be greatly appreciated.
Regards,
Santiago RodrÃguez
LEED AP BD + C
Director of Energy Department
Revitaliza Consultores
__._,_.___
Posted by: iluminasol33@xxxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___