[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Loads from the ventilation and from the building enveloppe with Ideal Loads





Hello everybody,

I'm just learning to use E+ and I'm only working with IdealLoads for the moment. With these IdealLoads, from what I understood, I only become as Outputs, the total heating/cooling loads for the whole building which includes the losses/gains from the enveloppe and from the ventilation. Is there any way/output to differentiate theses losses/gains one from the other. Like one Output which shows the heating/cooling need in the room (to offset the enveloppe losses/gains) and one which shows the heating/cooling load for preheating/precooling the supply air from the ventilation.

Kind regards,

Johann

__._,_.___

Posted by: giolince@xxxxxxxxx


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___