[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Decimals in Open Studio
I'm using Open Studio 1.6.0.My first simulation worked. Then I've changed one thickness in the text editor; here :
0.40, !- Thickness {m}
instead of
0.2032, !- Thickness {m}
The value has been correctly edited in Open Studio but the simulation has failed with this message :
**FATAL:Error condition occurred. Previous Severe Errors cause termination.
When I extract the out idf file from the failed simulation and run it with Energy+, there is no error but I don't know the equivalent of Results viewer on Energyplus. I think it's strange.
__._,_.___
Posted by: frantzheribert@xxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___