[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] GrndTempCalc: building not temperature controlled





This statement in the doc was ambiguous to me:

"Field: TIN1 ? TIN12 <month> Inddoor Average temperature set point
The next twelve fields specify the average indoor building set point temperatures for each month of the year. These fields are useful for simulating a building that is not temperature controlled for some of the year. In such a case, the average indoor set point temperatures can be obtained by first running the model in EnergyPlus with an insulated floor boundary condition, and then using the resulting monthly average zone temperatures in these fields."


"obtained by first running the model": Is this the slab model? or building model?
"average zone temperatures": Are these the TAverage (slab average temperature)? Or building zone temperatures.


My understanding is that it's the slab. You can't assign zone temperatures to ground zone temperatures except as the monthly indoor air temperatures.




__._,_.___

Posted by: bvonmoss@xxxxxxxxx


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___