Dear All,
I found that simulation models of chillers implemented in E+ do not contain parameters of chiller components (i.e., condenser, evaporator and expansion valve, except the compressor). It seems that these models do not go to the component level to model
each component of chillers. Am I right? Thank you.
----------------------------------------
Best Regards
Ying Yan
Graduate Student
Electrical & Computer Engineering
School of Engineering
University of Connecticut
__._,_.___
Posted by: "Yan, Ying" <yiy11005@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___