[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Chiller models in E+





correct. they are modelled based on a performance matrix of the chiller over many variable variables, if that makes sense. The performance map should account for cycling inefficiencies, etc, etc.

2015-05-29 18:06 GMT+02:00 'Yan, Ying' yiy11005@xxxxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:
 

Dear All,

I found that simulation models of chillers implemented in E+ do not contain parameters of chiller components (i.e., condenser, evaporator and expansion valve, except the compressor).  It seems that these models do not go to the component level to model each component of chillers.  Am I right?  Thank you. 

----------------------------------------
Best Regards

Ying Yan

Graduate Student
Electrical & Computer Engineering
School of Engineering
University of Connecticut




__._,_.___

Posted by: Jean Marais <jeannieboef@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___