[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] non-convex warning



Without seeing the previous model, I can't say for sure you did or did not have a concave roof before.

What solar distribution did you choose previously? (In the Building object). (the model you sent has FullExterior)

--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13

LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr

2015-12-03 10:53 GMT+01:00 fati_tilak@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:
 

Thank you so much, but...

I know that in the case of cutting my roofs into Quadrilateral or convex shapes, the warning probably will be fix. but the problem is about the main cause of this problem. If the non-convex shapes of roof is really not accepted and lead to this warning, why the other non-convex roofs which I modeled ran without any warning. I think may be there is another cause for this problem.

Thank you anyway. 

Best
Tilak
 




__._,_.___
Posted by: Julien Marrec <julien.marrec@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Visit Your Group
Yahoo! Groups
• Privacy • Unsubscribe • Terms of Use

__,_._,___