[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Multiple Indoor Units with VRF System inside A Single Zone
Dear EPlus Group,
Is it possible to model more than one VRF indoor units in the same zone? My case is a big laboratory space served by three VRF indoor units with the same outdoor condensing unit. Can I use ZoneHVAC:EquipmentList to add similar TU system? Or should I divide the zone into smaller zones representing an imaginary zone served by each indoor unit and connect all three zones with voids?
Second question, is it possible to link the supply air from secondary outdoor air system (DOAS) into each VRF indoor unit's mixer rather than directly blown into the zone? Presumably by defining ZoneHVAC:EquipmentConnections and tweaking OutdoorAir:Mixer?
Any help would be greatly appreciated,
Regards,
__._,_.___
Posted by: ad3_prasetya@xxxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___