[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Open-loop ground source heat pumps





Thanks all for your replay

Best regards
Rodolfo

Inviato da TypeMail

Il giorno 7 Gen 2016, alle ore 16:40, "Robin Curtis curtis@xxxxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> ha scritto:
 

You can just use a water source heat pump with a constant load-side inlet temperature.  (Much easier than closed loop). It will be down to your open loop designer/installer  to make sure that your inlet water temperature doesnâ??t rise or fall with time. 

Regards 

Robin


On 7 Jan 2016, at 11:04, r.carnicelli@xxxxxxxxxx [EnergyPlus_Support] < EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

Good morning everyone, I'm involved on a model that includes heat pump heating / cooling  with an open loop ground source circuit
I would like to have some suggestions on how to shape it into DesignBuilder / EnergyPlus
thanks in advance
Rodolfo






__._,_.___

Posted by: Rodolfo Carnicelli <r.carnicelli@xxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___