Sent from my BlackBerry 10 smartphone.
| From: Robin Curtis curtis@xxxxxxxxxxxxxxxx [EnergyPlus_Support] Sent: Thursday 7 January 2016 19:40 To: EnergyPlus_Support@xxxxxxxxxxxxxxx Reply To: EnergyPlus_Support@xxxxxxxxxxxxxxx Cc: r.carnicelli@xxxxxxxxxx Subject: Re: [EnergyPlus_Support] Open-loop ground source heat pumps |
You can just use a water source heat pump with a constant load-side inlet temperature. (Much easier than closed loop). It will be down to your open loop designer/installer to make sure that your inlet water temperature doesn’t rise or fall with
time.
Regards
Robin
On 7 Jan 2016, at 11:04, r.carnicelli@xxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Good morning everyone, I'm involved on a model that includes heat pump heating / cooling with an open loop ground source circuit
I would like to have some suggestions on how to shape it into DesignBuilder / EnergyPlus
thanks in advance
Rodolfo
__._,_.___
Posted by: Sarfraz <sarfrazd@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___