ÂHi all,
I'm trying to model a DHW system in which the water used by users is extracted by a water storage tank. The water storage tank is heated by 2 serpentines, the first one is linked to a solar loop and the second one is linked to a boiler which works when the solar loop is not able to guarantee the sp temperature.
I would like to ask if it is possible to model this system with a single waterheater:stratified. In this case, I would mode the DHW consumption via the scheduled water use but I've some doubts about the linking between the use/source tank nodes with the solar/hw loop loop...
Is it pobbile to model this system or am I following a wrong way?
I know that an alternative solution should be to model 2 indipendent tanks to replicate the 2 heating modes but I was wondering about using a single waterheater object, like it is in the reality.
Does anyone of you have an example of a similar tank?
Thanks Â
__._,_.___
Posted by: Jean Marais <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
![Yahoo! Groups]()