[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Cooling Energy Transfered to zone



Take a look at the .RDD text file which results from your simulation and shows all of the available output variables. I'm pretty sure that there is an output variable which reports COP, but am not sure about the energy variables, so you'll have to do some investigation.

On Fri, Jan 22, 2016 at 9:31 AM, alyelhefni@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Thanks Drikes , I've reviewed the definitions of output now and discovered that cooling energy transfer zone resembles ONLY sensible cooling energy , which was a hell of a mislead .

My goal is to calculate COP by dividing useful cooling energy by total electricty consumption .
What output variable or meter only tab that resembles both sensible and latent ( total ) cooling energy transfer from zone ?




--

James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504

Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx

Website l  LinkedIn

Fail faster!



__._,_.___
Posted by: Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Visit Your Group
Yahoo! Groups
• Privacy • Unsubscribe • Terms of Use

__,_._,___