[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] How is the reveal depth calculated
It is flush with the wall or calculated from the
coordinates:
To add a reveal, change the coordinates of the window (and reveal will be
calculated) or use the Simple Window where I think you can put in a
reveal. Documentation should tell you which way (+/-) reveal goes
then.
At 01:40 AM 1/22/2016, Amrita Ghosh amritaghosh1986@xxxxxxxxx
[EnergyPlus_Support] wrote:
Hi,
Can anyone tell me if I do not provide sill depth or reveal depth how is
the window positioned in the wall by default? Is it setback inward
completely or does it flush with the outer surface of the wall?
If I provide an inside reveal depth = 0 (default value) how will the
window be positioned?
Thank you,
Amrita Ghosh
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___