Ah I see!
Well, it is a jEPlus "problem". Since v1.6, it only extracts annual results unless you specify otherwise explicitly in the RVX... It is explained in the entry before your question, here: http://jeplus.org/mybb/showthread.php?tid=410.
Cheers,
Yi
From: Nacho Gomis [mailto:nachogo27@xxxxxxxxx]
Sent: 25 February 2016 11:52
To: yi@xxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Problem with rvi file
I attach all the files to generate the job.
I also add "my.rvi" file which is generated on the outputs.
Could it be something related to the standard code use to save the rvi file?
On 25 February 2016 at 12:38, Nacho Gomis <nachogo27@xxxxxxxxx> wrote:
Only the first three,the variables related to Ideal Loads are not listed. I'm using jEPlus ane I think it has the problem because it is working well with EP-Launch.
Probably is something related to the blank spaces in the variables name?If I open the my.rvi file all is without blank spaces but the ideal loads variables has blank spaces.
Thanks and sorry for crossposting (I've already written in jEPlus forum).
El 25/02/2016 12:30, "'Dr Yi Zhang' yi@xxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> escribió:
So what variables do you get in the csv?
Yi
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: 25 February 2016 10:55
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Problem with rvi file
Hello colleagues,
i'm performing a simulation and I have a lot of output variables in my idf.
So I want to select some of them and create a csv file using the rvi file.
The problem is that the csv file obtained only have 3 of the 4 variables I listed in the rvi file.
This is the code of the rvi file:
eplusout.eso
eplusout.csv
DistrictHeating
DistrictCooling
ElectricityNet
Zone Ideal Loads Supply Air Total Heating Energy
Zone Ideal Loads Zone Total Heating Energy
Zone Ideal Loads Outdoor Air Total Heating Energy
Zone Ideal Loads Supply Air Total Cooling Energy
Zone Ideal Loads Zone Total Cooling Energy
Zone Ideal Loads Outdoor Air Total Cooling Energy
0
And these are the variables on the idf file:
Output:Meter,DistrictHeating:Facility,Annual;
Output:Meter,DistrictCooling:Facility,Annual;
Output:Meter,ElectricityNet:Facility,Annual;
Output:Variable,*,Zone Ideal Loads Supply Air Total Heating Energy,Monthly; !- HVAC Sum [J]
Output:Variable,*,Zone Ideal Loads Supply Air Total Cooling Energy,Monthly; !- HVAC Sum [J]
Output:Variable,*,Zone Ideal Loads Zone Total Heating Energy,Monthly; !- HVAC Sum [J]
Output:Variable,*,Zone Ideal Loads Zone Total Cooling Energy,Monthly; !- HVAC Sum [J]
Output:Variable,*,Zone Ideal Loads Outdoor Air Total Heating Energy,Monthly; !- HVAC Sum [J]
Output:Variable,*,Zone Ideal Loads Outdoor Air Total Cooling Energy,Monthly; !- HVAC Sum [J]
All the data from the outputs are included in the eso file.
Could someone give me a hint what I'm doing wrong?
Thanks in advance.
__._,_.___
Posted by: "Dr Yi Zhang" <yi@xxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___