[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] coil water heating not power consumption [1 Attachment]





Dear Energy+ group.
 
I have model a system with air to water heat pump.
The compressor  cut-in temperature  (compressor set point temp ? dead band) is 53 cel. Meanwhile the water tank auxxiliary heater cut in temperature is 44 cel.
The problem is that I do not get any results from heat pump compressor power consumption (variable: HPWHPLANTDXCOIL:Cooling Coil Water Heating Electric Power).

does anyone has came accros this bug before ?

I have attached the file as well if you can have a look that would be appreciated.
 
Thank you in advance
 
Kind Regards
Dashamir


__._,_.___
View attachments on the web

Posted by: dashamir marini <dashamirmarini@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___
Attachment not found:
D:\Eudora\Attach\R9_HeatPump_noPower_consumption1.idf