ÂJim,
what about the grate angle when tilting the component block ?
Met vriendelijke groeten, Geert BellensOp 16/03/2016 om 20:29 schreef Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support]:
ÂGeert,How about making a DesignBuilder component block (Shading:Site:Detailed) with non-zero transmittance that corresponds to the grate's open area?
On Wed, Mar 16, 2016 at 3:19 PM, geert.bellens@xxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
ÂHas anyone experiance with modelling a grate (typical 44x44 mm) used as solar protection?
I have a client who wants to use such a grate under 45° to protect his building from the sun.
I could draw the grate in Designbuilder, but the dimensions are to small and the total surface is to large.
Is there a way to model such a solar protection in an alternative way?
Geert
--
James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website l  LinkedIn
There are two basic choices when considering our world:Â
1) it is all random happenstance
2) it was created with a purpose
Believing #1 can only result in anarchy. I pick #2 and work on discovering / living out that purpose.
--James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website l  LinkedIn
There are two basic choices when considering our world:Â
1) it is all random happenstance
2) it was created with a purpose
Believing #1 can only result in anarchy. I pick #2 and work on discovering / living out that purpose.
__._,_.___