[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Daily Sine wave amplitude....





Hello Jean,

I hadn’t heard of VDI 2078 so I did a quick web search. Now I know a little bit about the standard but have more questions.

 

When you have a minute:

How prevalent is the use of VDI 2078 in Germany? Outside of Germany?

Have there been any comparisons done of the predicted loads between VDI 2078 and other typical North American standards/tools (Trace, HAP, etc.)?

 

Should us North Americans become familiar with standard VDI 2078?

 

I am in no hurry for this so don’t interrupt your flow!

 

 

cid:image003.png@01D09C46.E75BA0D0

Christopher Jones, P.Eng.
Senior Engineer

 

WSP Canada Inc.

2300 Yonge Street, Suite 2300

Toronto, ON M4P 1E4
T +1 416-644-4226

F +1 416-487-9766

C +1 416-697-0056

 

www.wspgroup.com

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: Sunday, April 17, 2016 3:51 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Daily Sine wave amplitude....

 

 

That "is not a sin wave" comment is quite interesting. I've just finished setting up a spreadsheet to create a design day period (CDD) as required by VDI 2078. Since e+ does not yet support a longer warm up period where you can set a different 24 hr schedule for each of the previous 14 days, I am planning on using the caveat in the norm of rerunning the CDD 14 times (but loose the credit inherently given to more massive buildings, which is the point of the CDP). The authors of the norm specify equations based on a sine function, but break it up into 3 parts based on the time of max and min temps.

On 16 Apr 2016 20:26, "Joe Huang YJHuang@xxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

I caution that Design Days are by definition atypical conditions with the daily maxima corresponding to either the 0.6% or 1% highest hourly temperatures. Furthermore, the hourly profile described below is extremely generic and applied to all locations and conditions. I don't know how you intend to use the "daily variation sine curve", but if it's to understand the average daily temperatures for each month,  I would recommend calculating the average daily max/min from the weather file or even easier from Wikipedia, and then use the ASHRAE Design Day Profile

to fill out the 24 hour values. If you want to be more location-specific, you can analyze the weather file to derive the average monthly profiles. Last comment is that the daily profiles are not sine curves.

 

Joe

Sent from my iPad


On Apr 16, 2016, at 9:20 AM, Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

Dear Heba,

The ASHRAE 2013 Handbook of Fundamentals shows the typical daily temperature range for design days o p 14.11. I doubt that it applies to an entire year, but might be a nice starting point for your work.

Inline image 1

 

On Sat, Apr 16, 2016 at 12:15 PM, hassan_kamel77@xxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

Hello,

I am searching for the daily variation sine wave amplitude for a certain city.

I wonder, if it is included in the weather file !!

or, should we make some kind of equations !!

I am simulating a city, where there's high diurnal range between nighttime and daytime.

Thanks in advance,

Heba



 

--

James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504

Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx

Website l  LinkedIn

Guitar strings are in constant tension against the guitar's neck during their entire life. The tension doesn’t discourage the guitar’s neck. Rather, it allows beautiful music to be made. May it be so with

our lives and their tensions.



You are receiving this communication because you are listed as a current WSP contact. Should you have any questions regarding WSP’s electronic communications policy, please consult our Anti-Spam Commitment www.wspgroup.com/casl. For any concern or if you believe you should not be receiving this message, please forward this message to us at caslcompliance@xxxxxxxxxxxx so that we can promptly address your request. This message is intended only for the use of the individual or entity to which it is addressed, and may contain information which is privileged, confidential, proprietary or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying or in any way using this message. If you have received this communication in error, please notify the sender, and destroy and delete any copies you may have received.

WSP provides professional land surveying services through the following entities: WSP Surveys (AB) Limited Partnership and WSP Surveys (BC) Limited Partnership


__._,_.___

Posted by: "Jones, Christopher" <Christopher.r.Jones@xxxxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.





__,_._,___
Email file not found:
C:\Users\lklawrie\Downloads\Embedded\image001357.png
Attachment not found:
C:\Users\lklawrie\Downloads\Embedded\image00361.jpg
Attachment not found:
C:\Users\lklawrie\Downloads\Embedded\image00435.jpg