[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Inside temperature goes more the cooling setpoint!!!!!
Dear E+ experts,I have developed a 4 stories residential building (consisting apartments) in E+ and consider each apartment as a zone. floor area of each zone is 120 m2 and height of the zone is 3 m. So, the volume of each zone is around 360 M3. I set 27C as cooling and 22C as heating setpoint. I Also used the E+ HVAC template (PTAC). and the apartments are occupied whole the day.
The problem I encountered is related to the zone temperature. the results of the simulation say that the zone temerature is more than 30C around 6 PM in some days.
I do not know what should I do !
Does anybody have an idea about this issue?
Thank you in advance
Fatemeh
__._,_.___
Posted by: fati_tilak@xxxxxxxxx
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___