[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Minimum Equipment Efficiencies- Non Standard conditions 6.8.1C





Thank you, I will go through this.

On Thu, Feb 15, 2018 at 10:32 PM, 'Jones, Christopher' christopher.r.jones@xxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Addendum ch is rolled into the 90.1-2010 2013 Supplement:

https://www.ashrae.org/File%20Library/Technical%20Resources/Standards%20and%20Guidelines/Standards%20Addenda/90_1_2010_2013Addenda.pdf

 

 

 

Christopher R. Jones, P.Eng.

Technical Specialist

Sustainability & Energy

 

T +1 416-644-0252

 

2300 Yonge Street, Suite 2300

Toronto, ON M4P 1E4 Canada

wsp.com

 

 

Please consider the environment before printing...

 

 

From: EnergyPlus_Support@yahoogroups.com [mailto:EnergyPlus_Support@yahoogroups.com]
Sent: Thursday, February 15, 2018 4:55 AM
To: EnergyPlus_Support@yahoogroups.com
Subject: [EnergyPlus_Support] Minimum Equipment Efficiencies- Non Standard conditions 6.8.1C

 

 

Dear All,

 

This is not a direct question regarding simulation or E+ tool but about the ASHREA 90.1-2010 minimum efficiency requirements to comply with 6.8.1C for the chillers at Non Standard Conditions.

 

We are working on a project where designer shared chiller efficiencies at design conditions whereas table 6.8.1C gives chiller efficiency at ARI conditions. In order to show compliance we have done Kadj calculation as prescribed under 6.4.1.2 to adjust ASHRAE 90.1-2010 baseline efficiency at design conditions. Now my doubt is

 

1. What value of baseline chiller efficiency to be used in simulation to compare the performance of the chiller with the Proposed/design case; direct COP value from table 6.8.1C OR COP after Kadj calculations?

2. Does anyone has copy of Addenda CH?

 

Thank you for your expert advice.

 

regards,

 

--

 

 

Javed Iqbal, LEED AP, CEA

Sr. Energy Analyst 

 

 

 

 

 





NOTICE: This communication and any attachments ("this message") may contain information which is privileged, confidential, proprietary or otherwise subject to restricted disclosure under applicable law. This message is for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on, this message is strictly prohibited.. If you have received this message in error, or you are not an authorized or intended recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies. You are receiving this communication because you are listed as a current WSP contact. Should you have any questions regarding WSP's electronic communications policy, please consult our Anti-Spam Commitment at www.wsp.com/casl. For any concern or if you believe you should not be receiving this message, please forward this message to caslcompliance@xxxxxxx so that we can promptly address your request. Note that not all messages sent by WSP qualify as commercial electronic messages.

AVIS : Ce message, incluant tout fichier l'accompagnant (« le message »), peut contenir des renseignements ou de l'information privilégiés, confidentiels, propriétaires ou à divulgation restreinte en vertu de la loi. Ce message est destiné à l'usage exclusif du/des destinataire(s) voulu(s). Toute utilisation non permise, divulgation, lecture, reproduction, modification, diffusion ou distribution est interdite. Si vous avez reçu ce message par erreur, ou que vous n'êtes pas un destinataire autorisé ou voulu, veuillez en aviser l'expéditeur immédiatement et détruire le message et toute copie électronique ou imprimée. Vous recevez cette communication car vous faites partie des contacts de WSP. Si vous avez des questions concernant la politique de communications électroniques de WSP, veuillez consulter notre Engagement anti-pourriel au www.wsp.com/lcap. Pour toute question ou si vous croyez que vous ne devriez pas recevoir ce message, prière de le transférer au conformitelcap@xxxxxxx afin que nous puissions rapidement traiter votre demande. Notez que ce ne sont pas tous les messages transmis par WSP qui constituent des messages electroniques commerciaux.



-LAEmHhHzdJzBlTWfa4Hgs7pbKl




--


Javed Iqbal, LEED AP, CEA
Sr. Energy Analyst 







__._,_.___

Posted by: Javed Iqbal <eee.javed@xxxxxxxxx>


EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the &quot;search&quot; button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___