[Equest-users] Modeling a Solid Desiccant after a DX Coil
Doebber, Ian
Ian_Doebber at nrel.gov
Tue Apr 29 09:55:36 PDT 2008
I would like to model a Solid Desicant not as a preconditioner but to
simulate the following:
1. Precool outside air with a DX coil to a saturated condition,
2. Run that saturated air through the Solid Desiccant (therefore
running the Desicant at its most efficient point starting from a
saturated condition), and
3. Finally mixing that air with return air and then running that
through a Cooling Coil served by a Chiller before supplying to the
space.
Regards,
Ian Doebber
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080429/6cc447f3/attachment.htm>
More information about the Equest-users
mailing list