[Equest-users] reheat fan system

[Marcus Eliason]

Hello,

I have been working on a building that I am modeling with a reheat fan
system.  My question is about the MIN-FLOW-RATIO.  It seems that my heating
energy for the building is directly tied to this number.  When, I put the
ratio near zero, my heating energy is nonexistent and is quite large when
the ratio is set to 1.  I have attached a sample for reference.  Can someone
explain what might be happening, because I don't believe the heating energy
results the simulation is giving me?

Thanks,

Marcus Eliason
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reheat fan system.inp
Type: application/octet-stream
Size: 312737 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081215/32aefc1c/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reheat fan system.pd2
Type: application/octet-stream
Size: 19270 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081215/32aefc1c/attachment-0001.obj>