[Equest-users] [Bldg-sim] LS-C BuiLding Peak Load Components Report

Lam, Linda linda.lam at wspfk.com
Fri Dec 12 07:54:15 PST 2008

Reports can be seen when you click Tools/View Simulation output.
Linda Lam, LEED® AP
WSP Flack + Kurtz
405 Howard Street, Suite 500
San Francisco, CA 94105
Direct: 415.402.5813
Main Tel: 415.398.3833
Fax: 415.433.5311
website: http://www.wspfk.com
vCard: http://vcards.wspfk.com/vcardloader.php?filename=flackkurtz-linda-lam-wspfk-com-1227040073.vcf
image: <http://vcards.wspfk.com/usercard.php?filename=flackkurtz-linda-lam-wspfk-com-1227040073.png>   


From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Pallavi Mantha
Sent: Friday, December 12, 2008 7:36 AM
To: equest-users at lists.onebuilding.org
Cc: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] LS-C BuiLding Peak Load Components Report


Can anybody shed some light on how I can generate the Building Peak Load Components report in eQuest? Is there a way to specify which reports you'd like to see at the end of the simulation? I know this report can be generated using DOE 2.2 but I figured since eQuest is based on DOE engine.. I might be able to generate the same report in eQuest as well. 


Any input is highly appreciated,




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081212/05b6b7d4/attachment-0002.htm>

More information about the Equest-users mailing list